Dual-screen Independent Display Query Terminal Board for Bank Branch Lobby, WF-K3601, AndroidSBC, Aa

TL;DR: Dual-screen Independent Display Query Terminal Board for Bank Branch Lobby

AndroidSBC sourcing desk: touch query board pricing held flat through the current quarter serving Aarhus, Denmark. The WF-K3601 self-service query terminal Android motherboard spans the single-screen touch query all-in-one terminal and eleven sister models in the WF-K series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, 1080p HDMI plus LVDS panel output, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Aarhus and Denmark importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

Wanlin Manufacturing Group builds boards and nothing else, which is why the WF-K query terminal line is sold factory direct through AndroidSBC. Twelve models cover hospital, bank, government, retail, transport and outdoor query duty, and each one leaves the Longgang line in Shenzhen with the same peripheral driver bundle for Aarhus integrators. The factory ships to Denmark on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.

WF-K3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Denmark importers sourcing the WF-K family, the WF-K3601-A variant is the typical configuration for the hospital outpatient query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Denmark Buyers

Sourcing a self-service query terminal board for Denmark is not only a chip question. Aan Aarhus integrator has to align the touch stack, the printer and scanner drivers, the enclosure cut-outs and the compliance file set before a single unit reaches the field.

Compliance and logistics compound each other. Boards for Aarhus move through Port of Copenhagen, and any mismatch between the Energistyrelsen documents and the CE marking with the Danish Energy Agency radio notification route applied in Denmark surfaces at exactly the wrong moment. AndroidSBC answers this with a single BOM per lot, so aan Aarhus order of 40200 units carries the same silicon and firmware as the pilot batch for Denmark.

Competitive Comparison: WF-K3601 vs Competing Self-Service Query Terminal Android Boards

The comparison below reflects the configurations AndroidSBC ships to Aarhus against the typical competing query board offered in Denmark.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Information access is being treated as infrastructure in Denmark, and that changes what is procured. Instead of one-off kiosks, Aarhus operators specify the single-screen touch query all-in-one terminal as a standard unit to be repeated across a whole estate on the same firmware.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3601 and WF-K3566 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3566 and WF-K3288 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3288 over boards that re-spin silicon between lots.

What this means for Aarhus is that the query board is no longer a disposable line item. It is the component that determines whether Denmark deployments can be extended rather than rebuilt.

Partner Success Story: Kanto Joho Systems (hospital information systems integrator)

A Kanto Joho Systems deployment in the Japan healthcare segment illustrates how the WF-K query board family supports Aarhus integrators. Kanto Joho Systems installed 40200 query terminal boards across hospital information counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Joho Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus Energistyrelsen conformity, all bundled into the Shenzhen source-factory shipment.

Kanto Joho Systems General Manager for Japan Healthcare noted: Kanto Joho Systems specified silent touch response and precise formatting, and the WF-K board met both tests on the first lot of 40200 units delivered to Aarhus.

Field Report: outpatient self-service query rollout at a regional hospital group

SHENZHEN, September 22, 2026 - Liang Shu, AndroidSBC field desk. The WF-K3601 lot was soak-tested with the hall display and the touch panel running from one board, the configuration most Denmark projects specify. The WF-K3601 self-service query terminal Android motherboard order for Aarhus, Denmark cleared the burn-in station on schedule and is en route via the Copenhagen - Shanghai lane.

The WF-K3601 single-screen touch query all-in-one terminal production lot includes the WF-K3601-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Denmark integrators, the Energistyrelsen conformity plus CE marking with the Danish Energy Agency radio notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Denmark integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K3601 Application Scenarios

The WF-K3601 single-screen touch query all-in-one terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3601-A configuration is the typical build for the hospital outpatient query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3601 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Aarhus.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3399 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K1330 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K1331 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K6180 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Aarhus: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Aarhus Buyers

The partnership structure offered to Aarhus buyers is deliberately flexible: Denmark integrators can take the board alone, take it with the driver stack, or take it as a private-label programme.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whatever track aan Aarhus partner selects, the underlying board, firmware baseline and compliance files are identical, which keeps Denmark conversations about commercial terms rather than technical risk.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a single-screen touch query all-in-one terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The single-screen touch query all-in-one terminal runs on the WF-K baseline image that Denmark buyers receive, so there is no separate integration project.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-K family?

Answer: The RK3568 tier sits at a specific point on the price-versus-headroom curve. Below it the boards suit single-screen information lookup; above it they support dual-screen independent display and heavier video work, and AndroidSBC documents that mapping for Aarhus buyers.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Denmark?

Answer: Yes. Compliance files for Denmark are bundled into the source-factory shipment to Aarhus, and AndroidSBC provides the underlying test reports as well as the certificates on request.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: The first order MOQ on the WF-K family is set for pilot runs rather than container loads. Aarhus buyers can start small, then scale once Denmark field data is in hand, with 15-30 day bulk lead times.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. Custom ROM work on the WF-K family is scoped per Aarhus project rather than sold as a generic service, which keeps the Denmark deliverable tied to a specific deployment.

How are software updates and long-term support handled on the WF-K family?

Answer: Software updates on the WF-K family are staged rather than immediate, with rollback available at each step, which matters when aan Aarhus estate is live and Denmark sites cannot tolerate an unplanned outage.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC regularly ships the WF-K family into Denmark fulfilment centres on behalf of Aarhus sellers, handling the labelling and carton marking at the source factory.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: RMA and DOA units are handled against the production lot, since every WF-K board is logged against its firmware revision and burn-in result before it leaves Shenzhen. Aarhus partners report against the lot number and AndroidSBC matches it to the rig log.

Contact AndroidSBC: Start Your WF-K3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K self-service query terminal family. Aarhus integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Aarhus and Denmark the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.