HDMI Output Guide Motherboard for Information Point, WF-G3601, AndroidSBC, Aarhus

TL;DR: HDMI Output Guide Motherboard for Information Point

AndroidSBC sourcing desk: smart guide kiosk board pricing held flat through the current quarter serving Aarhus, Denmark. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Aarhus and Denmark importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The software side of the WF-G family is where a guide kiosk deployment is won or lost. AndroidSBC ships the boards on Android 10 through Android 15, plus Linux, Ubuntu and Debian images, with a common driver package for capacitive and IR touch controllers, barcode and QR engines, NFC readers, thermal printers, RFID readers, ID card readers, cameras and relay boards. A cloud content management client, a kiosk-mode lockdown layer and a staged OTA channel are part of the reference image, and the wayfinding and directory application interface is documented for integrators. For Aarhus and Denmark development teams the practical effect is that the board arrives as a platform, not as a blank SoC with a datasheet. For Denmark importers the working rhythm in Aarhus is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Denmark importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Denmark Buyers

The first obstacle for Denmark buyers is specification drift. A datasheet says RK3588 or RK3568, but the board that shows up on the Aarhus loading dock has different memory, a different display interface or a different Android build than the sample that was approved.

Dual-screen behaviour is a factory-set option. The WF-G family supports independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, and AndroidSBC validates the panel pairing before the lot ships to Aarhus, with Energistyrelsen conformity and CE marking with the Danish Energy Agency radio notification documentation attached for Denmark importers at Port of Copenhagen. For Aarhus and Denmark the Copenhagen - Shanghai lane remains the working option, and 39600 boards are booked on it as of September 18, 2026, the 3rd such release this cycle.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The competitive set for a smart guide kiosk board is wide, from single-chip vendor boards to full industrial computer modules. What separates them for Aarhus buyers in Denmark is whether the vendor can cover an entry price-check screen and a multi-screen AI advisory wall from one firmware baseline.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Labour economics keep pushing the same direction. With information desks under staffing pressure in Denmark, venue operators in Aarhus are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another mall smart guide kiosk board, and each one has to be managed as part of a fleet rather than as a standalone screen.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3566 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3566 and the industrial WF-G3288 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3288 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and aan Aarhus order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Denmark so integrators can sanity-check their own numbers.

Partner Success Story: Kanto Guide Systems (public venue guidance integrator)

A Kanto Guide Systems deployment in the Japan public venues segment illustrates how the WF-G guide kiosk board family supports Aarhus integrators. Kanto Guide Systems deployed 39600 WF-G guide boards across municipal halls, transit concourses and hospital orientation points in the Kanto region.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Guide Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus Energistyrelsen conformity, all bundled into the Shenzhen source-factory shipment.

Kanto Guide Systems Platform Lead for Japan Public Venues noted: Kanto Guide Systems runs unattended orientation points, so the hardware watchdog, scheduled power cycling and staged OTA on the WF-G board removed a whole class of site visits for the 39600 units now live in Aarhus.

Field Report: floor guide counter installation at a community shopping mall

SHENZHEN, September 18, 2026 - Chang An, AndroidSBC field desk. Each WF-G3601 board logged 20000 simulated directory searches and route queries on the test jig before the lot was cleared for Denmark shipment. The WF-G3601 smart guide kiosk Android motherboard order for Aarhus, Denmark cleared the burn-in station on schedule and is en route via the Copenhagen - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Denmark integrators, the Energistyrelsen conformity plus CE marking with the Danish Energy Agency radio notification paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, SHENZHEN. Denmark integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Aarhus.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Aarhus: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Aarhus Buyers

For Denmark buyers the WF-G family can be taken as a private-label product, as a custom design or as a stock catalogue item, and Aarhus partners usually start on one track and ladder up.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Aarhus, which is common when a distributor wins a tender that turns into a private-label line for Denmark.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with mall guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3568 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Denmark?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Denmark AndroidSBC bundles Energistyrelsen conformity and CE marking with the Danish Energy Agency radio notification into the same carton that clears Port of Copenhagen.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Aarhus and Denmark buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Denmark team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Aarhus integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the Energistyrelsen documentation set for Denmark customs at Port of Copenhagen.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G smart guide kiosk Android motherboard family. Aarhus integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Aarhus and Denmark the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.